Parent & Teacher Craft Guide
10 Creative Learning & Craft Ideas for Race Car and Formula 1 Coloring Pages
Once the pages are colored, you can turn them into simple projects for home or the classroom. Here are 10 easy craft ideas using supplies you probably already have, like scissors, glue sticks, and construction paper.
1
1. Cardboard Shoebox Formula 1 Pit Stop Garage
Materials Needed:
Two colored race car sheets printed on sturdy paperEmpty shoebox or clean tissue containerBlack construction paper or dark grey cardstockSafety scissors and washable glue stickClean plastic water bottle caps to serve as fuel barrels
Step by Step Guide:
- Color two of your favorite race car sheets using bright primary colors and bold racing numbers.
- Carefully cut around the outer vehicle outlines using child safety scissors, leaving a tiny white border around thin spoiler fins.
- Turn an empty shoebox on its long side so the open interior acts as a sheltered team pit garage bay.
- Line the interior floor with black construction paper and draw bright yellow lane stripes with a crayon to mark the tire change bay.
- Fold half inch paper tabs along the bottom of your cut out race cars and glue them to the garage floor so they stand upright ready for quick pit stops.
2
2. Friction Powered Cardboard Ramp Downhill Derby
Materials Needed:
Completed race car coloring pagesLong piece of corrugated cardboard from a shipping boxTwo sturdy hardcover books or wooden building blocksMeasuring tape or 12 inch wooden school rulerColored masking tape or painter tape for track lane lines
Step by Step Guide:
- Prop up one end of your long cardboard strip against two thick books to create a smooth downhill slope on the carpet or linoleum floor.
- Use blue or green painter tape to split the cardboard ramp into two parallel racing lanes from top to bottom.
- Carefully cut out your finished race car coloring sheets and paste them firmly to lightweight cardboard scraps cut to match the outline.
- Tape small wooden toy blocks or clean plastic bottle wheels beneath the cardboard cutouts so they roll freely down the slope.
- Release two cars simultaneously from the top edge and use your ruler to measure which car travels farthest across the room floor.
3
3. Popsicle Stick Starting Light Gantry with Drop Flag
Materials Needed:
Six jumbo wooden craft popsicle sticksSmall scrap of white paper and black fine tip markerRed green and yellow dot stickers or washable markersCraft tacky glue or low temp hot glue gun with adult supervisionClean wooden clothespin to hold the flag arm
Step by Step Guide:
- Glue two pairs of craft sticks vertically to form twin trackside gantry pillars, connecting them across the top with a horizontal crossbeam stick.
- Draw a simple checkered flag pattern on a three inch paper rectangle using a black marker and glue it to a wooden toothpick or straw.
- Affix red, yellow, and green circular stickers in a vertical row on the center overhead beam to mimic real grand prix start lights.
- Clip the clothespin to the side pillar to hold the checkered drop flag in place until race start time.
- Position the gantry arch across your toy racing track and drop the checkered flag downward when releasing cars from the starting grid.
4
4. Paper Plate Speedway Steering Wheel with Dash Gauges
Materials Needed:
Two sturdy white paper platesColor printout of racing car decals and gaugesBrass paper fastener split pin bradSafety scissors and glue stickBlack and red washable markers
Step by Step Guide:
- Cut out the center circular basin of the first paper plate, leaving only the outer corrugated rim and two spoke handles to form a real racing wheel shape.
- Color the steering wheel handles with black marker or wrap them in electrical tape to create a comfortable grip surface for small hands.
- On the second plate, draw speedometer dials, RPM gauges, and gear shift indicators with markers.
- Poke a small hole through the center of both plates and connect them loosely with a brass split pin brad so the wheel rotates smoothly over the dashboard.
- Hold the wheel while pretending to steer your colored race cars through tight hairpin turns around your living room track.
5
5. Clothespin and Straw Friction Powered Grand Prix Racers
Materials Needed:
Finished race car coloring sheets scaled down or trimmedStandard wooden spring clothespinsPlastic drinking straws cut into two inch segmentsWooden toothpick axles and plastic bottle caps for wheelsCraft glue or double sided foam tape
Step by Step Guide:
- Color your race car sheet with vibrant contrast patterns, focusing on the driver cockpit and racing spoiler.
- Cut out the vehicle body and glue it along the flat top edge of a wooden spring clothespin.
- Glue two short plastic straw pieces horizontally across the underside of the clothespin near the front and rear to act as axle sleeves.
- Slide wooden toothpicks through each straw sleeve and press clean plastic bottle caps onto the pointed ends to form sturdy spinning wheels.
- Roll your completed clothespin racer across smooth floor surfaces or race them down tabletop incline tracks against siblings.
6
6. Race Track Wall Banner and Championship Pennants
Materials Needed:
Four to six completed race car coloring sheetsLong piece of yarn, jute twine, or ribbonHole punch toolSafety scissorsGlitter glue or metallic gel pens for car numbers
Step by Step Guide:
- Color several different race car models using distinct color schemes like electric blue, racing green, and fiery orange.
- Cut each finished sheet into an inverted triangle pennant shape, keeping the race car centered proudly in the middle of the flag.
- Outline the racing numbers with metallic gel pens or glitter glue to give them an authentic championship trophy shine.
- Punch two clean holes along the top corners of each pennant flag using a standard school hole punch.
- Thread your twine through the holes and hang the finished banner across a bedroom wall, classroom door, or birthday party mantle.
7
7. Cardstock Trophy Podium Standings for Matchbox Races
Materials Needed:
Three empty cardboard cereal boxes or small square packagesGold, silver, and bronze yellow crayons or metallic markersCompleted race car cutoutsClear tape and school glue stickAluminum foil scraps for shiny trophy accents
Step by Step Guide:
- Cut three small cardboard boxes down to three different heights to represent first, second, and third place podium steps.
- Wrap the tallest box in gold foil or bright yellow paper, the middle box in silver foil, and the shortest in bronze brown paper.
- Write large numbers 1, 2, and 3 on the front face of each corresponding podium block with bold black marker.
- Tape the three boxes together side by side with first place standing proudly in the center.
- Park your top three colored race cars onto their winning podium spots after running tabletop distance trials.
8
8. Masking Tape Living Room Speedway with Hairpin Turns
Materials Needed:
Roll of gentle painter tape or low tack masking tapeCompleted race car coloring pages mounted on small cardsPlastic cups or building blocks for track corner markersPaper towel tubes cut into tunnel archesSmall toy cones or clean plastic lids for obstacles
Step by Step Guide:
- Press two parallel lines of painter tape onto an uncarpeted hardwood or tile floor to lay out straightaways and curved bends.
- Design a tricky hairpin curve by curving tape around a group of wooden building blocks that serve as track safety barriers.
- Slice a clean paper towel cardboard tube in half lengthwise and tape it over a straight stretch of track to create a dark tunnel overpass.
- Set up a designated pit lane off the main straightaway where cars must pull in for routine color touch ups and tire inspections.
- Drive your colored car cutouts around the complete indoor circuit while practicing road navigation and gentle finger coordination.
9
9. Color Coded Lap Time Scoreboard and Math Practice Grid
Materials Needed:
One sheet of clean white poster board or heavy cardstockCompleted miniature race car drawingsRuler and black permanent ink penRed, yellow, and green washable markersClean dice from a board game
Step by Step Guide:
- Use a ruler to draw a grid with four columns titled Driver Name, Qualifying Lap, Final Time, and Championship Points.
- Paste your favorite colored race car thumbnail cutouts into the first column next to each fictitious driver name.
- Roll a pair of dice to determine each car's lap time score and write the resulting numbers into the second and third columns.
- Practice simple addition or subtraction by adding the two dice values together to find the overall grand prix points total.
- Award the title of champion to the driver with the highest combined math score and display the board on the family bulletin board.
10
10. Laminated Pocket Travel Binder for Long Road Trips
Materials Needed:
Ten printed race car coloring pagesClear three ring plastic binder sleeves or self adhesive laminating sheetsSmall three ring school binder or pocket folderPack of fine point dry erase markers in various colorsFelt square or clean sock to serve as an eraser
Step by Step Guide:
- Insert your favorite uncolored race car printable sheets into clear plastic sheet protectors or laminate them with clear contact paper.
- Organize the protected sheets sequentially inside a lightweight travel binder with pockets.
- Tuck a set of colorful dry erase markers and a small clean sock into the binder pencil pouch for easy car travel access.
- Children can color the cars in the backseat of the family vehicle using dry erase markers directly over the clear plastic coating.
- Wipe the plastic clean with the felt cloth when finished so the entire collection can be recolored on the return trip home.
